Job discovery, built for Nigeria

Sterling Oil Exploration & Energy Production Company Limited (SEEPCO) is an indigenous company that ventured into Exploration and Production (E&P) business in the year 2005 bid round held by Department of Petroleum Resources (DPR) and was successful with license OML 143 (formerly OPL 280). At SEEPCO, we are committed to excellence in the oil and gas sector, driving innovation, sustainability, and growth. Follow us for the latest updates, industry insights, and career opportunities. We are recruiting to fill the position below: Job Title: Inlet System Operator Locations: Akwa Ibom & Delta Employment Type: Contract; Full-Time; Rotational Shift About the Role We are actively recruiting a highly skilled Inlet System Operator on behalf of a premier Oil & Gas and Fertilizer production company. Operating within a world-class, integrated production facility, you will take ownership of the Ammonia Plant Front-End / Inlet Systems, encompassing Natural Gas reception, feed gas compression, and desulfurization (Amine/ZnO) units. This role is the critical first step in the ammonia synthesis value chain, ensuring the delivery of clean, high-quality feedstock to the reformers. The ideal candidate is deeply ingrained in a "Goal Zero" HSE culture, possesses advanced expertise in high-pressure gas processing, rotating equipment (centrifugal/reciprocating compressors), and DCS monitoring, and is committed to Asset Integrity and Operating within Safe Operating Limits (SOL). You will utilize digital work management systems (CMMS) to drive reliability, minimize flare/venting, and ensure absolute process safety. Key Responsibilities Inlet/Feedstock & Desulfurization Operations: Operate, monitor, and optimize the Natural Gas Reception, Feed Gas Compression, and Desulfurization units (including Amine absorbers/strippers and Zinc Oxide reactors) via the DCS and field panels. Ensure the continuous supply of clean, sulfur-free feed gas to the Primary Reformer, strictly maintaining process parameters (temperature, pressure, flow) within Safe Operating Limits (SOL). Monitor and control critical inlet equipment, including scrubbers, knockout drums, coalescers, and high-pressure gas compressors, ensuring optimal separation and compression efficiency. Manage catalyst bed temperatures and breakthrough monitoring in desulfurization reactors to protect downstream ammonia synthesis catalysts from poisoning. Process Optimization & Energy Transition: Analyze process trends and laboratory data to optimize amine circulation rates, steam consumption, and compressor anti-surge control, directly supporting the plant’s energy efficiency and flare reduction targets. Execute complex start-ups, normal operations, and Emergency Shutdowns (ESD) of the inlet systems in strict adherence to Standard Operating Procedures (SOPs). Identify and resolve operational bottlenecks, participating in Deviation Management and Root Cause Analysis (RCA) to prevent recurrence. Asset Integrity, Reliability & Digital Work Management: Champion the facility’s Asset Integrity Management System (AIMS), monitoring for corrosion, erosion, and hydrate formation in high-pressure gas systems. Utilize the Computerized Maintenance Management System (CMMS - e.g., SAP PM / IBM Maximo) to raise, track, and close work orders, document technical histories, and manage spare parts for the inlet packages. Support Reliability-Centered Maintenance (RCM) strategies, collaborating with the mechanical/rotating equipment team during condition monitoring (vibration, lube oil analysis) and Turnaround Maintenance (TAM). HSE, Process Safety & Leadership: Strictly enforce the company’s Life-Saving Rules, Permit to Work (PTW), and Lock-Out/Tag-Out (LOTO) procedures, ensuring zero energy incidents during maintenance handovers. Actively participate in Job Safety Analysis (JSA), Hazard Identification (HAZID), and Toolbox Talks, exercising Stop Work Authority (SWA) when conditions are unsafe. Operate safely in Hazardous Areas (Zone 1 & 2), ensuring compliance with IECEx / ATEX / CompEx standards for all instrumentation and electrical interfaces. Mentor junior operators and field technicians, fostering a high-performance, safety-first, and continuous improvement culture. Requirements & Qualifications OND, HND, B.Eng/B.Sc in Chemical Engineering, Mechanical Engineering, or Gas Engineering; or a recognized advanced technical certification in Process Operations. Minimum 5 years of hands-on operational experience specifically as a Panel/Field Operator in the Front-End / Gas Processing / Feedstock preparation section of a large-scale Ammonia, Fertilizer, Petrochemical, or Gas Processing plant. Proven, verifiable experience operating high-pressure gas compressors, amine/TEG systems, and desulfurization reactors. Deep understanding of gas sweetening, dehydration, high-pressure compression thermodynamics, and catalyst protection principles. Strong ability to read and interpret P&IDs, PFDs, compressor performance curves, and cause-and-effect matrices Familiarity with DCS/SCADA systems (e.g., Honeywell, Yokogawa, Emerson) and advanced process control (APC) concepts. Certifications & HSE: Valid HSE Level 1, 2, & 3 certifications; strong awareness of Process Safety Management (PSM). CompEx or equivalent Hazardous Area certification is a strong advantage. BOSIET/HUET and valid Offshore Medical (if applicable to site/terminal rotation). What We Offer A highly competitive, top-tier Oil & Gas remuneration package with applicable rotation allowances. Opportunity to operate world-class, high-integrity front-end assets in an integrated fertilizer facility. Exposure to advanced digital work management, energy optimization, and flare reduction initiatives. A "Goal Zero" safety culturewith clear career progression into

Sterling Oil Exploration & Energy Production Company Ltd. (SEEPCO) is an indigenous company that ventured into Exploration and Production (E&P) business in the year 2005 bid round held by Department of Petroleum Resources (DPR) and was successful with license OML 143 (formerly OPL 280). At SEEPCO, we are committed to excellence in the oil and gas sector, driving innovation, sustainability, and growth. Follow us for the latest updates, industry insights, and career opportunities. We are recruiting to fill the position below: Job Title: Residue Gas Compressor Operator Locations: Akwa Ibom and Delta Employment Type: Contract | Full-Time | Rotational Shift & Contract About the Role We are actively recruiting a highly specialized Residue Gas Compressor Operator. Operating within a world-class, integrated Ammonia/Urea production facility, you will take ownership of the critical Residue Gas / Tail Gas Compression systems and associated rotating equipment. This role is pivotal in maximizing synthesis loop efficiency, managing purge gas recovery for fuel optimization, and driving flare reduction/energy transition initiatives. The ideal candidate is deeply ingrained in a "Goal Zero" HSE culture, possesses advanced expertise in centrifugal compressor performance, anti-surge control, and dry gas seals, and is committed to Asset Integrity and Reliability-Centered Maintenance (RCM). You will utilize digital work management systems (CMMS) to ensure zero unplanned downtime and absolute process safety. Key Responsibilities Residue Gas Compression & Rotating Equipment Operations: Operate, monitor, and optimize the Residue Gas Compressor (RGC), Synthesis Gas Compressors, and associated utility compressors from the DCS panel and/or field, ensuring stable performance across all load conditions. Monitor and control critical compressor parameters: anti-surge control systems, dry gas seals (DGS), lube oil consoles, vibration/protection systems, and interstage cooling. Analyze compressor performance curves, calculate polytropic/isentropic efficiency, and execute real-time adjustments to maximize throughput while preventing surge, stonewall, or mechanical damage. Manage the compression of ammonia synthesis loop purge gas / tail gas, optimizing the recovery system to supply fuel to the Primary Reformer, directly supporting the plant’s flare reduction and energy efficiency targets. Ammonia Process Integration & Optimization: Ensure seamless integration of the compression systems with the Ammonia Synthesis Loop, Primary/Secondary Reformers, and Methanation units. Collaborate with Process Engineers to optimize synthesis loop pressure, purge rates, and hydrogen recovery based on compressor capacity and residue gas composition. Execute complex start-ups, normal operations, and Emergency Shutdowns (ESD) of the compressor packages in strict adherence to Standard Operating Procedures (SOPs) and OEM guidelines. Asset Integrity, Reliability & Digital Work Management: Champion the facility’s Asset Integrity Management System (AIMS) for all rotating equipment, utilizing condition monitoring data (vibration, lube oil analysis, thermography) to predict and prevent failures. Utilize the Computerized Maintenance Management System (CMMS - e.g., SAP PM / IBM Maximo) to raise, track, and close work orders, document technical histories, and manage spare parts for the compressor packages. Participate in Root Cause Analysis (RCA), failure mode investigations, and Management of Change (MOC) for compressor modifications or operational tweaks. Support Reliability-Centered Maintenance (RCM) strategies and coordinate with the mechanical/rotating equipment engineering team during Turnaround Maintenance (TAM) and major overhauls. HSE, Process Safety & Leadership: Strictly enforce the company’s Life-Saving Rules, Permit to Work (PTW), and Lock-Out/Tag-Out (LOTO) procedures, ensuring zero energy incidents during maintenance handovers. Actively participate in Job Safety Analysis (JSA), Hazard Identification (HAZID), and Toolbox Talks. Operate safely in Hazardous Areas (Zone 1 & 2), ensuring compliance with IECEx / ATEX / CompEx standards for all instrumentation and electrical interfaces on the compressor skids. Mentor junior operators and field technicians, fostering a high-performance, safety-first, and continuous improvement culture. Requirements & Qualifications OND, HND, B. Eng / B.Sc Degree in Mechanical Engineering, Chemical Engineering, or Gas Engineering; or a recognized advanced technical certification in Rotating Equipment/Compressor Operations Minimum of 5 years of hands-on operational experience specifically as a Panel/Field Operator or Rotating Equipment Specialist in a large-scale Ammonia, Urea, Fertilizer, or Petrochemical plant Proven, verifiable experience operating and troubleshooting multi-stage centrifugal compressors (Syngas, Residue Gas, Refrigerant, or Air compressors). Deep understanding of compressor thermodynamics, anti-surge logic, performance mapping, and dry gas seal systems. Familiarity with Machinery Protection Systems (MPS) and Integrated Turbine Compressor Control (ITCC) systems (e.g., Woodward, Bently Nevada, GE Mark VI). Strong ability to read and interpret **P&IDs, compressor performance curves, lube oil schematics, and cause-and-effect matrices Certifications & HSE: Valid **HSE Level 1, 2, & 3 certifications; Process Safety Management (PSM) awareness. CompEx or equivalent Hazardous Area certification is a strong advantage. BOSIET/HUET and valid Offshore Medical (if applicable to site rotation). What We Offer A highly competitive, top-tier Oil & Gas remuneration package with applicable rotation allowances. Opportunity to operate world-class, high-integrity rotating equipment in an integrated fertilizer facility. Exposure t

Sterling Oil Exploration & Energy Production Company Limited (SEEPCO) is an indigenous company that ventured into Exploration and Production (E&P) business in the year 2005 bid round held by Department of Petroleum Resources (DPR) and was successful with license OML 143 (formerly OPL 280). At SEEPCO, we are committed to excellence in the oil and gas sector, driving innovation, sustainability, and growth. Follow us for the latest updates, industry insights, and career opportunities. We are recruiting to fill the position below: Job Title: Storage Operator Locations: Akwa Ibom & Delta Employment Type: Contract; Full-Time; Rotational Shift About the Role We are actively recruiting a highly specialized Storage Operator. Operating within a world-class, integrated Ammonia/Urea production facility, you will take full ownership of the Ammonia Tank Farm, Vapor Recovery Systems, and Product Loading/Unloading Racks (truck, rail, or marine). This role is pivotal in ensuring the safe custody, storage, and distribution of liquid ammonia while driving environmental compliance, vapor recovery, and zero-loss custody transfer initiatives. The ideal candidate is deeply ingrained in a "Goal Zero" HSE culture, possesses advanced expertise in pressurized/refrigerated storage dynamics, boil-off gas (BOG) management, and custody transfer metering, and is committed to Asset Integrity and Process Safety Management (PSM). You will utilize digital work management systems (CMMS) to ensure zero unplanned downtime, absolute product integrity, and flawless environmental compliance. Key Responsibilities Ammonia Storage & Tank Farm Operations: Operate, monitor, and optimize the Ammonia Storage Tanks (pressurized and/or refrigerated), ensuring strict control of temperature, pressure, and inventory levels. Manage Boil-Off Gas (BOG) recovery systems, vapor return lines, and refrigeration units (if applicable) to maintain tank integrity and minimize product loss/flaring. Monitor tank farm utilities, including rundown pumps, seal oil systems, cooling water, and flare/vent headers. Execute complex tank farm start-ups, normal operations, tank rotations, and Emergency Shutdowns (ESD) in strict adherence to Standard Operating Procedures (SOPs). Loading, Unloading & Custody Transfer: Safely coordinate and execute the loading and unloading of liquid ammonia via truck, rail, or marine jetties, ensuring zero spills and absolute personnel safety. Operate and monitor Custody Transfer Metering Systems (e.g., Coriolis mass flow meters, prover systems) to ensure 100% accuracy in product dispatch and reconciliation. Manage vapor balance and pressure control during loading/unloading operations to prevent atmospheric emissions and ensure environmental compliance. Asset Integrity, Reliability & Digital Work Management: Champion the facility’s Asset Integrity Management System (AIMS) for all storage assets, monitoring corrosion rates, cathodic protection systems, and leak detection systems. Support statutory and API-compliant tank inspections (e.g., API 653, API 620) and coordinate internal/external cleaning and maintenance activities. Utilize the Computerized Maintenance Management System (CMMS - e.g., SAP PM / IBM Maximo) to raise, track, and close work orders, document technical histories, and manage spare parts for the tank farm and loading racks. Participate in Root Cause Analysis (RCA) and Management of Change (MOC) for storage system modifications or operational tweaks. HSE, Process Safety & Leadership: Strictly enforce the company’s Life-Saving Rules, Permit to Work (PTW), and Lock-Out/Tag-Out (LOTO) procedures, ensuring zero energy incidents during maintenance handovers or tank entries. Act as a key responder in Ammonia Emergency Response Plans (ERP), utilizing specialized PPE (SCBA, Level A/B suits) and managing ammonia leak containment. Operate safely in Hazardous Areas (Zone 1 & 2), ensuring compliance with **IECEx / ATEX / CompEx standards for all instrumentation and electrical interfaces on the storage skids. Mentor junior operators and loading personnel, fostering a high-performance, safety-first, and continuous improvement culture. Requirements & Qualifications HND, B.Eng/B.Sc in Chemical Engineering, Mechanical Engineering, or Gas Engineering; or a recognized advanced technical certification in Process Operations. Minimum 5 years of hands-on operational experience specifically as a Panel/Field Operator in a Tank Farm, Terminal, or Storage facility handling highly hazardous chemicals (Ammonia, LNG, LPG, or Petrochemicals). Proven, verifiable experience managing custody transfer, loading racks, and pressurized/refrigerated storage systems. Deep understanding of thermodynamics of liquefied gases, vapor recovery, and custody transfer metering principles. Familiarity with tank farm DCS/SCADA systems, automated loading skids, and emergency shutdown (ESD) logic. Strong knowledge of API standards for storage tanks (API 650, API 620, API 653) and environmental regulations regarding VOC/Ammonia emissions. Certifications & HSE: Valid HSE Level 1, 2, & 3 certifications; Process Safety Management (PSM) awareness. Specialized Ammonia Emergency Response / Toxic Gas Awareness training is a strong advantage. CompEx or equivalent Hazardous Area certification is a strong advantage. BOSIET/HUET and valid Offshore Medical (if applicable to site/terminal rotation). What We Offer A highly competitive, top-tier Oil & Gas remuneration package with applicable rotation allowances. Opportunity to operate world-class, high-integrity storage and terminal assets in an integrated fertilizer facility. Exposure to advanced digital work management, vapor recovery, and environmental compliance initiatives. A "Goal Zero" safety culture with clear career progression

Sunik Group Nigeria is recruiting to fill the position below: Job Title: Property Manager Location: Uyo, Akwa Ibom Employment Type: Full-time What you will do Get more properties to manage and keep owners happy Collect rent and report to owners on time Win new clients, partners, and investors Build sales leads and close deals Report monthly on sales and income Requirements Degree in Estate Management or Business 2 to 5 years' experience in property management or real estate Good record of meeting targets Good at talking to and negotiating with clients. Salary N100,000 monthly.

Sunik Group Nigeria is recruiting to fill the position below: Job Title: General Manager Location: Uyo, Akwa Ibom Employment Type: Full-time What you will do Run all our business units (real estate, farm estate, poultry and eggs, partnership, Bukka, property management, interior décor, consultancy) Set targets and grow revenue and profit Manage staff, cash, and reports. Requirements Degree in a related field 2-5 years' experience in a managerial position Proven record of growing a business Honest and good with accountability. Salary N150,000 - N300,000 monthly.

Sunik Group Nigeria is recruiting to fill the position below: Job Title: Business Development Officer Location: Uyo, Akwa Ibom Employment Type: Full-time What you will do Get more properties to manage and keep owners happy Collect rent and report to owners on time Win new clients, partners, and investors Build sales leads and close deals Report monthly on sales and income Requirements Degree in Business or Marketing 2 to 5 years' experience in sales and marketing Good record of meeting targets Good at talking to and negotiating with clients. Salary N100,000 monthly.